Disassembly And Assembly: Disassembly

WARNING: This page is about a different car, the 2002 Nissan Altima. However, it is still accessible from the selected car via links, so may be relevant.

Remove the tank with Tool.

Fig 1: Removing Tank With Tool
Courtesy of NISSAN MOTOR CO., U.S.A.
- Grip the crimped edge and bend it upwards so that Tool slips off.
  Do not bend excessively.
  
  Fig 2: Grip Crimped Edge & Bend It Upwards
  Courtesy of NISSAN MOTOR CO., U.S.A.
- In areas where Tool cannot be used, use a screwdriver to bend the edge up.
  
  Fig 3: Using Screwdriver To Bend Edge Up
  Courtesy of NISSAN MOTOR CO., U.S.A.
Be careful not to damage tank.
Make sure the edge stands straight up.
Remove oil cooler from tank (A/T model only).

Fig 4: Removing Oil Cooler From Tank
Courtesy of NISSAN MOTOR CO., U.S.A.