LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Air Bag Restraint Systems) >> Diagnostics >> Clearing Codes >> Using Consult Tester

Using Consult Tester

WARNING: This page is about a different car, the 2002 Infiniti Q45. However, it is still accessible from the selected car via links, so may be relevant.
  1. After repairing system, connect battery cable. Connect CONSULT tester to Data Link Connector (DLC). See Figure . Turn ignition on. Touch START. Touch AIRBAG. Touch SELF-DIAG (CURRENT). If no malfunction is detected, repair is complete. If malfunction is indicated, repair fault message indicated. See FAULT MESSAGES  . Touch ERASE to erase code retained in memory. If trouble code is not erased, AIR BAG warning light will continue to indicate a malfunction.
  2. Touch BACK button. Touch SELF DIAG (PAST). Ensure no fault message is present. Turn ignition off. Turn off CONSULT tester. Disconnect CONSULT tester from DLC. Turn ignition on. Verify no malfunction is indicated by AIR BAG warning light. See AIR BAG WARNING LIGHT  under SYSTEM OPERATION CHECK.
scientia non olet · About LEMON Manuals