LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 710 (Instrument Panel - Coupe) >> Instrument Panel Assembly >> Removal and Installation >> Removal >> Console Boot (M/T Models)

Console Boot (M/T Models)

WARNING: This page is about a different car, the 2003 Infiniti G35. However, it is still accessible from the selected car via links, so may be relevant.
  1. Insert a thin flat-bladed screwdriver wrapped with tape from behind console boot, and remove metal clip on back. Then pull up and back to disengage from front metal clip.
  2. Disconnect hazard switch harness connector, and remove console boot.
scientia non olet · About LEMON Manuals