LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 71 (Air Bag Restraint System) >> Disposal Procedures >> Off-Vehicle Deployment >> Side Air Bag Module

Side Air Bag Module

WARNING: This page is about a different car, the 2001 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disable air bag system. See DISABLING & ACTIVATING AIR BAG SYSTEM  . Remove side air bag module from seat back and place module on a clean, dry, work bench with trim cover facing upward. See SIDE AIR BAG MODULE  under REMOVAL & INSTALLATION.
  2. Drill two 0.256" (6.5 mm) diameter holes in deployment bracket. See Figure . Align side air bag module studs with drilled holes in deployment bracket. Attach side air bag module to deployment bracket using 6 mm nuts. Mount side air bag module and bracket in vise. Attach deployment tool to air bag module, using appropriate deployment adapter. See SPECIAL TOOLS  .
  3. Position fully charged 12-volt battery at least 16 ft. (5 m) from deployment area. Connect Red deployment tool clip to positive battery terminal and Black deployment tool clip to negative battery terminal.
  4. Ensure deployment tool power lamp glows Green. If deployment tool power lamp glows Red, reverse battery connections and recheck lamp. Ensure no one is within 16 ft. (5 m) of air bag module. Press deployment tool button to deploy side air bag module.
scientia non olet · About LEMON Manuals