LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 552 (Automatic Transmission - Sedan) >> Shift Control System >> Adjustment of A/T Position >> AWD Models

AWD Models

WARNING: This page is about a different car, the 2005 Infiniti G35. However, it is still accessible from the selected car via links, so may be relevant.
  1. Loosen nut of control rod.
  2. Place PNP switch and selector lever in "P" position.
  3. While pressing lower lever toward rear of vehicle (in P position direction), tighten nut to specified torque. Refer to "CONTROL DEVICE COMPONENTS (AWD MODELS) ".
    CAUTION: Do not push the bracket.
    Fig 1: Loosening Nut Of Control Rod
    G02349629Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals