LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 552 (Automatic Transmission - Sedan) >> Shift Control System >> Adjustment of A/T Position >> 2WD Models

2WD Models

WARNING: This page is about a different car, the 2005 Infiniti G35. However, it is still accessible from the selected car via links, so may be relevant.
  1. Loosen nut of pivot pin.
  2. Place PNP switch and selector lever in "P" position.
  3. While pressing lower lever toward rear of vehicle (in "P" position direction), tighten nut to specified torque. Refer to "CONTROL DEVICE COMPONENTS (2WD MODELS) ".
    Fig 1: Loosening Nut Of Pivot Pin
    G02349628Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals