LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 415 (Rear Final Drive) >> Rear Final Drive Assembly >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2004 Infiniti M45. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove exhaust center tube with power tool. Refer to EXHAUST SYSTEM .
  2. Remove rear cross bar with power tool. Refer to DESCRIPTION .
  3. Remove rear stabilizer bar with power tool. Refer to STABILIZER BAR .
  4. Remove rear propeller shaft from the final drive. Refer to REMOVAL AND INSTALLATION .
  5. Remove rear drive shaft from final drive, then suspend it by wire etc. with power tool.
  6. Remove breather hose from the final drive.
  7. Remove rear wheel sensor. Refer to REMOVAL AND INSTALLATION .
  8. Place a transmission jack on the final drive.
    CAUTION: Do not place a transmission jack on the rear cover (aluminum case).
  9. Remove the mounting bolts and nuts connecting to the suspension member, and remove the rear final drive.
scientia non olet · About LEMON Manuals