LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 383 (Transfer Case) >> Front Drive Shaft >> Disassembly And Assembly >> Disassembly

Disassembly And Assembly: Disassembly

WARNING: This page is about a different car, the 2004 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front bearing, using drift and puller.
    1. Tool number A: ST35300000 (-) 
    2. B: ST30021000 (J22912-01) 
    Fig 1: Removing Front Bearing
    G00728960Courtesy of NISSAN MOTOR CO., U.S.A.
  2. Remove the rear bearing, using drift and puller.
  1. Tool number A: ST33710000 (-) 
  2. B: ST30021000 (J22912-01) 
Fig 2: Removing Rear Bearing
G00728961Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals