Check Before Engine Is Started

WARNING: This page is about a different car, the 2004 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.

CHECK AT CHECK INDICATOR LAMP
1. Park vehicle on level surface.
2. Move selector lever to "P" position.
3. Turn ignition switch to "OFF" position and wait at least 10 seconds.
4. Turn ignition switch to "ON" position. (Do not start engine.)
Does AT CHECK indicator lamp light up for about 2 seconds?
1. Yes: GO TO 2.
2. No: Stop the road test and go to AT CHECK INDICATOR LAMP DOES NOT COME ON .
CHECK AT CHECK INDICATOR LAMP
Does AT CHECK indicator lamp flash for about 8 seconds?
1. Yes: For TCM fail-safe mode, carry out self-diagnostics and record all NG items on the diagnostics worksheet. Refer to SELF-DIAGNOSTIC PROCEDURE (WITH CONSULT-II) .
2. No:
  1. Turn ignition switch to "OFF" position.
  2. Carry out the self-diagnostics and record all NG items on the diagnostics worksheet. Refer to SELF-DIAGNOSTIC PROCEDURE (WITH CONSULT-II) .
  3. Go to CHECK AT IDLE .