LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 357 (Engine Cooling System) >> Water Pump >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2004 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drain engine coolant so that no engine coolant comes out from water pump fitting hole.
    CAUTION: Perform when the engine is cold.
  2. Remove following parts.
    • Engine front undercover using power tool.
    • Air duct (inlet); Refer to AIR CLEANER AND AIR DUCT in ENGINE MECHANICAL - TITAN - 5.6L article..
    • Drive belt; Refer to DRIVE BELTS in ENGINE MECHANICAL - TITAN - 5.6L article..
    CAUTION: Leave auto tensioner pulley in its fixed position when removing drive belt.
  3. Remove water pump pulley.
  4. Remove water pump.
    • Engine coolant will leak from the cylinder block, so have a receptacle ready below.
    CAUTION: Handle water pump vane so that it does not contact any other parts.
scientia non olet · About LEMON Manuals