Park/Neutral Position Switch
WARNING: This page is about a different car, the 2004 Nissan Altima and 2003 Nissan Altima. However, it is still accessible from the selected car via links, so may be relevant.
- Remove shift cable from manual shaft.
- Set manual shaft in Neutral.
- Loosen PNP switch bolts.
- Insert .16 in. (4-mm) pin into adjustment holes in both PNP switch and manual shaft assembly as near vertical as possible. See Fig 1.
- Reinstall any part removed.
- Check continuity of PNP switch. See appropriate DIAGNOSIS article.