LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 306 (Front Suspension) >> Removal & Installation >> Compression Rod >> Removal

Compression Rod: Removal

WARNING: This page is about a different car, the 2003 Infiniti G35. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove tire. Remove engine undercover. Remove front cross bar from vehicle (Coupe only).
    2. CAUTION: Temporarily tighten mounting nut to prevent damage to threads and to prevent ball joint remover from coming off.
    NOTE: Be careful not to damage ball joint boot.
  2. Remove cotter pin of compression rod ball joint, and loosen nut. Use a ball joint remover to remove compression rod from steering knuckle. Remove compression rod from vehicle.
scientia non olet · About LEMON Manuals