LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 2322 (Engine Control System - DTCS P0447 To P1211) >> DTC P0605 ECM >> DTC Confirmation Procedure >> Procedure For Malfunction C >> With CONSULT-II

With CONSULT-II

WARNING: This page is about a different car, the 2006 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch ON and select "DATA MONITOR" mode with CONSULT-II.
  2. Turn ignition switch OFF and wait at least 10 seconds.
  3. Turn ignition switch ON and wait at least 1 second.
  4. Repeat step  2 to  3 for 32 times
  5. If 1st trip DTC is detected, go to , "DIAGNOSTIC PROCEDURE ".
    Fig 1: Consult-II DATA MONITOR Display Screen
    G04080353Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals