LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 2287 (Engine Control System - DTCS P1211 Through P2A03) >> DTC P2127, P2128 App Sensor >> DTC Confirmation Procedure >> With Consult-III

With Consult-III

WARNING: This page is about a different car, the 2008 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-III.
  3. Start engine and let it idle for 1 second.
  4. Check 1st trip DTC.
  5. If DTC is detected, go to "DIAGNOSTIC PROCEDURE ".