LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 2147 (Front Suspension) >> Unit Disassembly And Assembly >> Coil Spring And Shock Absorber >> Disassembly and Assembly >> Assembly

Disassembly and Assembly: Assembly

WARNING: This page is about a different car, the 2011 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.
  1. When installing coil spring on strut, it must be positioned as shown.
    Fig 1: Identifying Installation Position Of Coil Spring
    G07155208
  2. Install the shock absorber mounting insulator as shown in line with lower shock mount and step in lower seat.
    • The step in the strut assembly lower seat faces outside of vehicle.
  3. Tighten the new piston rod lock nut to specification. Refer to "COMPONENT ".
    • Use a new piston rod lock nut for assembly.
  4. Remove commercial service tool.
    Fig 2: Identifying LH Strut Assembly
    G07155209
scientia non olet · About LEMON Manuals