LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 2110 (Automatic Transmission) >> DTC P0500 Vehicle Speed Sensor MTR >> DTC Confirmation Procedure >> With Consult-III

With Consult-III

WARNING: This page is about a different car, the 2008 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch "ON" and select "DATA MONITOR" mode for "TRANSMISSION" with CONSULT-III.
  2. Start engine.
  3. Drive vehicle and maintain the following conditions for at least 5 consecutive seconds.

    VHCL/S SE-A/T: 30 km/h (17 MPH) or more 

    ACCELE ANGLE: 10 % or less 

  4. If DTC is detected, go to "DIAGNOSTIC PROCEDURE ".