LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 2100 (Power Steering System) >> Steering Wheel >> On-Vehicle Service >> Checking Neutral Position On Steering Wheel >> Checking

Checking Neutral Position On Steering Wheel: Checking

WARNING: This page is about a different car, the 2008 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check that the steering wheel is in neutral position when driving straight ahead.
  2. If it is not in neutral position, remove the steering wheel and reinstall it correctly.
  3. If the neutral position is between two teeth, loosen tie-rod lock nuts. Turn the tie-rods by the same amount in opposite directions on both left and right sides.
    Fig 1: Identifying Neutral Position On Steering Wheel (OK & NG Examples)
    G04906852Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals