Removal and Installation: Installation

WARNING: This page is about a different car, the 2008 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.

Installation is in the reverse order of removal noting the following:

Install the stabilizer bar bushings and clamps in the specified orientation. Refer to "REMOVAL AND INSTALLATION ".
Tighten the stabilizer bar and connecting rod nuts and bolts to specification. Refer to "COMPONENTS ".
Tighten the steering gear bolts to specification. Refer to "REMOVAL AND INSTALLATION ".
Tighten the transverse link bolts and nuts to specification. Refer to "REMOVAL AND INSTALLATION ".
Check the wheel alignment. Refer to "FRONT WHEEL ALIGNMENT ".