LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 2070 (Instrument Panel) >> Center Console Assembly >> CVT Finisher >> Removal

CVT Finisher: Removal

WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place the shift lever in the Drive position.
  2. Separate the chrome finisher from the shift knob by pushing it down.
  3. Remove the shift knob (1) by removing the spring clip and pulling up. Then remove the chrome finisher (2).
  4. Set the parking brake.
  5. Pull up to release the clips and remove CVT finisher.
  6. Disconnect the bulb housing from the assembly.
    Fig 1: Identifying Shift Knob And Chrome Finisher
    G04916217Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals