LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 205 (Engine Mechanical) >> Engine Oiling >> Oil Pump >> Reassembly

Oil Pump: Reassembly

WARNING: This page is about a different car, the 2002 Lexus LS 430. However, it is still accessible from the selected car via links, so may be relevant.
  1. To reassemble, reverse disassembly procedure. Ensure both rotors are installed in oil pump body with identification marks (triangle mark) facing toward oil pump cover. Tighten oil pump cover bolts to specification. See TORQUE SPECIFICATIONS .
  2. If installing crankshaft front seal, use hammer and Seal Installer (09316-60010). Install NEW oil seal until seal surface is even with oil pump body. Apply grease to sealing lip of seal.
scientia non olet · About LEMON Manuals