LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 2010 (Transfer Case) >> TX15B >> Transfer Control Unit >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Switch 4WD shift switch to 2WD and set transfer assembly to 2WD.
    CAUTION: When removing transfer control unit, transfer state must be at 2WD.
  2. Turn the ignition switch OFF and disconnect negative battery terminal.
  3. Remove the lower instrument panel LH. Refer to "LOWER INSTRUMENT PANEL LH ".
  4. Disconnect the two transfer control unit connectors.
    Fig 1: Identifying Transfer Control Unit
    G04898489
  5. Remove the transfer control unit bolts.
  6. Remove the transfer control unit.
scientia non olet · About LEMON Manuals