Special Service Tools
WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.
SPECIAL SERVICE TOOLS REFERENCE
Tool number
(Kent-Moore No.)
Tool name |
Description |
KV40104000
( - )
Flange wrench |
|
- Removing self-lock nut
- Installing self-lock nut
- a: 85 mm (3.35 in)
- b: 65 mm (2.56 in)
|
ST33290001
(J-34286)
Puller |
|
- Removing front oil seal
- Removing rear oil seal
- Removing metal bushing
|
KV38100500
( - )
Drift |
|
- Installing front oil seal
- a: 80 mm (3.15 in) dia.
- b: 60 mm (2.36 in) dia.
|
ST30720000
(J-25405)
Drift |
|
- Installing rear oil seal
- Installing input bearing
- Installing input oil seal
- a: 77 mm (3.03 in) dia.
- b: 55.5 mm (2.185 in) dia.
|
KV40105310
( - )
Drift |
|
- a: 89 mm (3.50 in) dia.
- b: 80.7 mm (3.17 in) dia.
|
ST22360002
(J-25679-01)
Drift |
|
- a: 23 mm (0.91 in) dia.
- b: 32 mm (1.26 in) dia.
|
ST35300000
( - )
Drift |
|
- Removing sun gear assembly and planetary carrier assembly
- Removing carrier bearing
- Installing metal bushing
- a: 59 mm (2.32 in) dia.
- b: 45 mm (1.77 in) dia.
|
ST33200000
(J-26082)
Drift |
|
- Removing input bearing
- Installing sun gear assembly and planetary carrier assembly
- Installing input oil seal
- a: 74.5 mm (2.933 in) dia.
- b: 62.5 mm (2.461 in) dia.
|
ST30031000
( - )
Puller |
|
- Removing carrier bearing
- Removing front drive shaft front bearing
- Removing front drive shaft rear bearing
- a: 90 mm (3.54 in) dia.
- b: 50 mm (1.97 in) dia.
|
ST33710000
( - )
Drift |
|
- Removing needle bearing
- Removing metal bushing
- a: 24 mm (0.94 in) dia.
- b: 89 mm (3.5 in)
- c: 30 mm (1.18 in) dia.
|
ST35325000
( - )
Drift bar |
|
- a: 215 mm (8.46 in)
- b: 25 mm (0.98 in) dia.
- c: M12 x 1.5P
|
ST33052000
( - )
Adapter |
|
- Removing front drive shaft front bearing
- Removing front drive shaft rear bearing
- Installing mainshaft
- a: 28 mm (1.10 in) dia.
- b: 22 mm (0.87 in) dia.
|
ST22452000
(J-34335)
Drift |
|
- Removing press flange snap ring
- Installing press flange snap ring
- a: 45 mm (1.77 in) dia.
- b: 36 mm (1.42 in) dia.
- c: 400 mm (15.76 in) dia.
|
ST30911000
( - )
Puller |
|
- Removing press flange snap ring
- Installing press flange snap ring
- Installing mainshaft
- Installing carrier bearing
- a: 98 mm (3.86 in) dia.
- b: 40.5 mm (1.594 in) dia.
|
KV31103300
( - )
Drift |
|
- Removing press flange snap ring
- Installing press flange snap ring
- Installing carrier bearing
- a: 76.3 mm (3.004 in) dia.
- b: 130 mm (5.12 in)
|
KV38100300
(J-25523)
Drift |
|
- Removing mainshaft rear bearing
- a: 54 mm (2.13 in) dia.
- b: 46 mm (1.81 in) dia.
- c: 32 mm (1.26 in) dia.
|
ST15310000
(J-25640-B)
Drift |
|
- Installing mainshaft rear bearing
- a: 96 mm (3.78 in) dia.
- b: 84 mm (3.31 in) dia.
|
KV40100621
(J-25273)
Drift |
|
- Installing front drive shaft front bearing
- Installing front drive shaft rear bearing
- a: 76 mm (2.99 in) dia.
- b: 69 mm (2.72 in) dia.
|
ST30032000
(J-26010-01)
Base |
|
- Installing front drive shaft front bearing
- Installing front drive shaft rear bearing
- a: 38 mm (1.50 in) dia.
- b: 80 mm (3.15 in) dia.
|
ST3322000
( - )
Drift |
|
- Installing needle bearing
- a: 37 mm (1.46 in) dia.
- b: 31 mm (1.22 in) dia.
- c: 22 mm (0.87 in) dia.
|