LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 1983 (Automatic Air Conditioner) >> Trouble Diagnosis >> CONSULT-II Function (BCM) >> Data Monitor >> Operation Procedure

Operation Procedure

WARNING: This page is about a different car, the 2006 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
  1. Touch "AIR CONDITIONER" on "SELECT TEST ITEM" screen.
    Fig 1: CONSULT-II Display - Select Test Item
    G04757809Courtesy of NISSAN MOTOR CO., U.S.A.
  2. Touch "DATA MONITOR" on "SELECT DIAG MODE" screen.
    Fig 2: CONSULT-II Display - Select Diag Mode
    G04757810Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Touch either "ALL SIGNALS" or "SELECTION FROM MENU" on "DATA MONITOR" screen.
    DATA MONITOR FUNCTION REFERENCE

    All signals Monitors all the items.
    Selection from menu Selects and monitors the individual item selected.
  4. Touch "START".
  5. When "SELECTION FROM MENU" is selected, touch items to be monitored. When "ALL SIGNALS" is selected, all the items will be monitored.
  6. Touch "RECORD" while monitoring, then the status of the monitored item can be recorded. To stop recording, touch "STOP".
    Fig 3: CONSULT-II Display - Data Monitor
    G04757811Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals