LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 1950 (Engine Control System - VK45DE) >> DTC P1568: ICC Function >> DTC Confirmation Procedure >> With Consult-II

With Consult-II

WARNING: This page is about a different car, the 2005 Infiniti FX45. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Press MAIN switch on ICC steering switch.
  4. Drive the vehicle at more than 40 km/h (25 MPH).
  5. Press SET/COAST switch.
  6. If DTC is detected, go to "DIAGNOSTIC PROCEDURE  ".
    Fig 1: Displaying Data Monitor
    G02358729Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals