Data List / Active Test
WARNING: This page is about a different car, the 2006 Scion tC. However, it is still accessible from the selected car via links, so may be relevant.
- DATA LIST
HINT:
According to DATA LIST display by the intelligent tester, you can read the values of the switches, sensors, actuators and so on without parts removal. Reading the DATA LIST as the first step of troubleshooting is one method to shorten work time.
- Warm up the engine.
- Turn the ignition switch OFF.
- Connect the intelligent tester to the DLC3.
- Turn the ignition switch ON.
- Operate the intelligent tester according to the step on the display and select "DATA LIST".
ECM
DATA LIST / ACTIVE TEST
| Item | Measurement Item/Range (Display) | Normal Condition | Diagnostic Note |
|---|---|---|---|
| Vehicle Sped | Vehicle speed/Min.: 0 km/h (0 mph), Max.: 255 km/h (158 mph) | Almost the same as the actual vehicle speed (When driving) | - |
| Engine Spd | Engine speed/Min.: 0 rpm, Max.: 16,282 rpm | Almost the same as the actual engine speed (When engine is running) | - |
| Coolant Temp | Coolant temperature/Min.: -40°C (40°F), Max.: 140°C (284°F) | After warming up: 80 to 95°C (176 to 203°F) | If the value is "-40°C (-40°F)" or "140°C (284°F)", sensor circuit is open or shorted |
Skid control ECU with actuator
ITEM AND NORMAL CONDITION
| Item | Measurement Item/Range (Display) | Normal Condition | Diagnostic Note |
|---|---|---|---|
| (FR/FL/RR/RL) Wheel Speed | Vehicle speed/Min.: 0 km/h (0 mph), Max.: 326 km/h (202 mph) | Almost the same as actual speed (When driving) | - |