Outer Rear View Mirror: Installation

WARNING: This page is about a different car, the 2006 Scion tC. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

Use the same procedures for the RH side and LH side.
The procedures listed below are for the LH side.

INSTALL OUTER REAR VIEW MIRROR ASSEMBLY LH
1. Install the mirror with the 3 nuts.
  Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf)
2. Connect the connector.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Fig 1: Installing Outer Rear View Mirror Screws - Lh
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
PERFORM INITIALIZATION
1. Perform initialization (see INITIALIZATION ).
  NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.