Side Turn Signal Light Assembly: Removal

WARNING: This page is about a different car, the 2006 Scion tC. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

Use the same procedures for the RH side and LH side.
The procedures listed below are for the LH side.

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
REMOVE OUTER REAR VIEW MIRROR ASSEMBLY LH (See REMOVAL )
REMOVE SIDE TURN SIGNAL LIGHT LENS LH
1. Detach the 4 claws and remove the cover.
  
  Fig 1: Detaching Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the 2 screws.
3. Disconnect the connector and remove the side turn signal light lens LH.
  
  Fig 2: Removing Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002