LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 1935 (Lighting) >> Rear Combination Light Assembly >> On-Vehicle Inspection

On-Vehicle Inspection

WARNING: This page is about a different car, the 2006 Scion tC. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT REAR COMBINATION LIGHT ASSEMBLY 
    1. Measure the voltage according to the value(s) in the table below.
      Fig 1: Identifying Rear Combination Light Connector Terminal
      G04224167Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Standard voltage 

    CONNECTOR TERMINAL VOLTAGE SPECIFICATIONS

    Tester Connection Condition Specified Condition
    2 - 6 Light control switch is in TAIL position 10 to 14 V
    3 - 6 Shift R position 10 to 14 V
    4 - 6 Turn signal switch is in LH (RH) position Alternating between 0 to 9 V (60 to 120 times per minute)
    5 - 6 Brake pedal is depressed 10 to 14 V