High Mounted Stop Light Assembly: Removal
WARNING: This page is about a different car, the 2006 Scion tC. However, it is still accessible from the selected car via links, so may be relevant.
- DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
- REMOVE BACK DOOR GARNISH CENTER (See DISASSEMBLY )
- REMOVE BACK DOOR SIDE GARNISH LH (See DISASSEMBLY )
- REMOVE BACK DOOR SIDE GARNISH RH (See DISASSEMBLY )
- REMOVE BACK DOOR GARNISH SUB-ASSEMBLY OUTSIDE
- REMOVE CENTER STOP LIGHT ASSEMBLY
- Disconnect the connector.
- Remove the 4 nuts and detach the 2 claws, and then remove the center stop light.