LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 1934 (Supplemental Restraint System) >> Front Airbag Sensor >> Removal

Front Airbag Sensor: Removal

WARNING: This page is about a different car, the 2006 Scion tC. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Be sure to read the precautionary notices concerning the SRS airbag system before servicing it (see PRECAUTION  ).
  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    NOTE: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  2. REMOVE ENGINE UNDER COVER LH 
  3. REMOVE ENGINE UNDER COVER RH 
  4. REMOVE FRONT AIRBAG SENSOR LH 
    1. Disconnect the sensor connector.
    2. Remove the 2 bolts and sensor.
    Fig 1: Removing Bolts And Front Airbag Sensor LH
    G04224012Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. REMOVE FRONT AIRBAG SENSOR RH 
    1. Disconnect the sensor connector.
    2. Remove the 2 bolts and sensor.
    Fig 2: Removing Bolts And Front Airbag Sensor RH
    G04224013Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals