Typical Enabling Conditions
WARNING: This page is about a different car, the 2006 Scion tC. However, it is still accessible from the selected car via links, so may be relevant.
TYPICAL ENABLING CONDITIONS
| Monitor runs whenever following DTCs not present | None |
M/T:
TYPICAL ENABLING CONDITIONS
| Engine coolant temperature | 70°C (158°F) or more |
| Engine speed | 2,000 to 6,400 rpm |
| Fuel cut at high engine revolution | Not executing |
| Engine Load | 30% at 2,000 rpm 30% at 3,600 rpm 35% at 5,200 rpm 45% at 6,800 rpm |
A/T:
TYPICAL ENABLING CONDITIONS
| Transmission counter gear speed | 300 rpm or more |
| Engine | Running |
| Either of following condition (a) or (b) met: | - |
| (a) Following conditions 1 and 2 met: | - |
| 1. ECT and ECT sensor | 20°C (68°F) or more, and sensor does not malfunction (P0115 or P0116) |
| 2. Time after PNP switch turned OFF | 10 seconds or more |
| (b) Following conditions 1 and 2 met: | - |
| 1. ECT and ECT sensor | Less than 20°C (68°F), and sensor malfunction (P0115 or P0116) |
| 2. Time after PNP switch turned OFF | 30 seconds or more |
| Time after ignition switch turned ON | 3 seconds or more |