LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 1867 (Manual Transmission) >> Preparation >> Special Service Tools

Special Service Tools

WARNING: This page is about a different car, the 2006 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.

The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.

SPECIAL SERVICE TOOLS

Tool number
(Kent-Moore No.)
Tool name		 Description
ST30911000
( - )
Inserter
G04076425
  • Installing mainshaft bearing
  • Installing 5th-6th synchronizer hub assembly
  • Installing reverse main gear bushing
  • Installing 3rd gear bushing
  • Installing 3rd-4th synchronizer hub assembly
  1. : 98 mm (3.86 in) dia  .
  2. : 40 mm (1.57 in) dia  .
ST30022000
( - )
Inserter
G04076425
  • Installing 3rd main gear
  • Installing 4th main gear
  1. : 110 mm (4.33 in) dia  .
  2. : 46 mm (1.81 in) dia  .
ST27861000
( - )
Support ring
G04203423
  • Installing 1st-2nd synchronizer hub assembly
  • Installing 1st gear bushing
  1. : 62 mm (2.44 in) dia  .
  2. : 52 mm (2.05 in) dia  .
ST30032000
(J-26010-01)
Inserter
G04076425
 Installing counter rear bearing inner race
  1. : 80 mm (3.15 in) dia  .
  2. : 31 mm (1.22 in) dia  .
KV32102700
( - )
Drift
G04203425
 Installing main drive gear bearing
  1. : 48 mm (1.89 in) dia  .
  2. : 41 mm (1.61 in) dia  .
ST23860000
( - )
Drift
G04203426
 Installing reverse counter gear
  1. : 38 mm (1.50 in) dia  .
  2. : 33 mm (1.30 in) dia  .
ST01530000
( - )
Drift
G04203427
 Installing reverse synchronizer hub assembly
  1. : 50 mm (1.97 in) dia  .
  2. : 41 mm (1.61 in) dia  .
KV381054S0
(J-34286)
Puller
G04076295
 Removing rear oil seal
ST33200000
(J-26082)
Drift
G04203429
  • Installing counter rear bearing
  • Installing rear oil seal
  1. : 60 mm (2.36 in) dia  .
  2. : 44.5 mm (1.752 in) dia  .
KV38100500
( - )
Drift
G04203430
 Installing dust seal (for 2WD models)
  1. : 80 mm (3.15 in) dia  .
  2. : 60 mm (2.36 in) dia  .
KV40100630
(J-26092)
Inserter
G04076425
 Installing 4th counter gear thrust washer
  1. : 67 mm (2.64 in) dia  .
  2. : 38 mm (1.50 in) dia  .
KV38102100
(J-25803-01)
Drift
G04203432
 Installing front cover oil seal
  1. : 44 mm (1.73 in) dia  .
  2. : 28 mm (1.10 in) dia  .
KV32103300
(J-46529)
Press plate
G04203433
 Installing reverse synchronizer hub assembly
  1. : 73 mm (2.87 in) 
ST30031000
(J-22912-01)
Puller
G04203434
 Measuring wear of inner bulk ring
ST22490000
( - )
Adapter setting plate
G04203435
 Holding a adapter plate
ST33400001
(J-26082)
Drift
G04203436
 Installing oil seal
  1. : 60 mm (2.36 in) dia  .
  2. : 47 mm (1.85 in) dia  .
scientia non olet · About LEMON Manuals