LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 1766 (Brake System (Sedan)) >> Front Disc Brake >> Removal and Installation of Brake Caliper Assembly >> Installation

Removal and Installation of Brake Caliper Assembly: Installation

WARNING: This page is about a different car, the 2006 Infiniti G35. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Refill with new brake fluid "DOT 3".
  • Never reuse drained brake fluid.
  1. Install disc rotor.
    CAUTION: Align the matching marks of disc rotor and wheel hub, which were marked at the time of removal when reusing disc rotor.
  2. Install caliper assembly to vehicle, and tighten torque member mounting bolts to the specified torque. Refer to "COMPONENTS ".
    CAUTION: Before installing torque member to vehicle, wipe oil and grease on washer seats on steering knuckle and mounting surface of torque member.
  3. Install a projection of brake hose metal fitting by aligning with protrusions on cylinder body, and tighten union bolt to the specified torque. Refer to "COMPONENTS ".
    CAUTION:
    • Do not reuse copper washers for union bolts.
    • Assemble brake hose securely on caliper assembly.
  4. After installing caliper assembly, refill with new brake fluid and bleed air. Refer to "BLEEDING BRAKE SYSTEM ".
  5. Install tires to vehicle.
scientia non olet · About LEMON Manuals