Lighting Switch Signal Inspection

WARNING: This page is about a different car, the 2006 Infiniti G35. However, it is still accessible from the selected car via links, so may be relevant.

CHECK BCM INPUT SIGNAL
1. Select "BCM" on CONSULT-II.
2. With "DATA MONITOR" of "BUZZER", confirm "LIGHT SW 1ST" when the lighting switch is operated.
  "LIGHT SW 1ST"
  
  Lighting switch (1st position) : ON
  
  Lighting switch (OFF) : OFF
OK or NG
1. OK: INSPECTION END
2. NG: Check lighting switch. Refer to "COMBINATION SWITCH INSPECTION ".
  
  Fig 1: CONSULT-II Screen Display - Data Monitor
  Courtesy of NISSAN MOTOR CO., U.S.A.