LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 1687 (Transfer Case) >> ATX14B >> Transfer Fluid >> Inspection

Transfer Fluid: Inspection

WARNING: This page is about a different car, the 2006 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: If using the vehicle for towing, the transfer fluid must be replaced as specified. Refer to "PERIODIC MAINTENANCE ".

FLUID LEAKAGE AND FLUID LEVEL 

  1. Make sure that fluid is not leaking from the transfer assembly or around it.
  2. Check fluid level from the filler plug hole as shown.
    CAUTION: Do not start engine while checking fluid level.
  3. Install the filler plug with a new gasket to the transfer. Tighten to the specified torque. Refer to , "COMPONENTS ".
    CAUTION: Do not reuse gasket.
Fig 1: Inspecting Fluid Level From Filler Plug Hole
G04174418Courtesy of NISSAN MOTOR CO., U.S.A.