LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 161 (Anti-Lock Brake System) >> Removal & Installation >> Brake Actuator Assembly >> Installation

Brake Actuator Assembly: Installation

WARNING: This page is about a different car, the 2003 Lexus LS 430, 2002 Lexus LS 430, and 2001 Lexus LS 430. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse removal procedure. Install the 3 cushions and 2 holders to the brake actuator. Install the brake actuator to the bracket with the 2 nuts and tighten to specification. See TORQUE SPECIFICATIONS .
  2. Install the bolt, 2 nuts and brake actuator assembly. Tighten to specification. See TORQUE SPECIFICATIONS .
  3. Connect the 2 connectors and brake hose to the brake actuator.
  4. Using special tool (09751-36011), connect the 6 brake lines to the actuator and tighten to specification. See TORQUE SPECIFICATIONS .
  5. Install the front fender liner, splash shield and outside molding.
  6. Install engine room No. 3 R/B and engine room side cover.
  7. Fill reservoir with brake fluid and bleed system. See BLEEDING BRAKE SYSTEM .
  8. Check for leaks.
scientia non olet · About LEMON Manuals