Component Inspection

WARNING: This page is about a different car, the 2005 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.

Turn ignition switch "OFF".
Disconnect ATP switch harness connector.
Remove ATP switch. Refer to "LOCATION OF ELECTRICAL PARTS ".

Push and release ATP switch and check continuity between ATP switch terminals 8 and 9.

Fig 1: Checking Continuity Between ATP Switch Terminals 8 And 9

Courtesy of NISSAN MOTOR CO., U.S.A.

CONTINUITY BETWEEN ATP SWITCH TERMINALS 8 AND 9 REFERENCE

Terminal	Condition	Continuity
8 - 9	Push ATP switch	Yes
8 - 9	Release ATP switch	No

If NG, replace the ATP switch. Refer to "LOCATION OF ELECTRICAL PARTS ".