M/T Oil: Changing: Filling
WARNING: This page is about a different car, the 2005 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the filler plug. Fill with new oil until oil level reaches the specified limit near the filter plug hole.
Oil grade and Viscosity: Refer to "FLUIDS AND LUBRICANTS ".
Oil capacity: Refer to "FLUIDS AND LUBRICANTS ".
- After refilling the oil, check oil level. Set a gasket to the filler plug, then install it to the transmission. Tighten the filler plug to the specified torque. Refer to
"CASE COMPONENTS ".CAUTION: Do not reuse gasket.