LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 1454 (Seats) >> Seat >> Disassembly and Assembly >> Removal Of Seatback Assembly

Removal Of Seatback Assembly

WARNING: This page is about a different car, the 2005 Nissan 350Z. However, it is still accessible from the selected car via links, so may be relevant.
  1. After completing the steps 1 of "SEATBACK TRIM AND PAD", remove the harness connectors for the reclining motor (driver seat only).
  2. Pull out the harness connector for the side air bag from the seat cushion.
  3. Remove the reclining device mounting bolts on the seatback frame, and remove the seatback assembly.
    NOTE: When assembling the seatback frame, make sure that the reclining device are locked on both sides, and be sure to temporarily tighten the bolts, then tighten them finally.
scientia non olet · About LEMON Manuals