LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 1430 (Engine Control System) >> DTC P0335: CKP Sensor (Pos) >> Component Inspection >> Crankshaft Position Sensor (Pos)

Crankshaft Position Sensor (Pos)

WARNING: This page is about a different car, the 2005 Nissan 350Z. However, it is still accessible from the selected car via links, so may be relevant.
  1. Loosen the fixing bolt of the sensor.
  2. Disconnect CKP sensor (POS) harness connector.
  3. Remove the sensor.
  4. Visually check the sensor for chipping.
    Fig 1: Checking Sensor For Chipping
    G02401582Courtesy of NISSAN MOTOR CO., U.S.A.
  5. Check resistance as shown in the figure.
    Fig 2: Terminal Resistance Chart
    G02401583Courtesy of NISSAN MOTOR CO., U.S.A.
    Fig 3: Checking Resistance
    G02401584Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals