LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 1237 (Front Axle) >> Front Drive Shaft >> Disassembly and Assembly >> Disassembly >> Support Bearing

Support Bearing

WARNING: This page is about a different car, the 2004 Nissan Altima, 2003 Nissan Altima, and 2002 Nissan Altima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove dust shield.
    Fig 1: Removing Dust Shield
    G02887297Courtesy of NISSAN MOTOR CO., U.S.A.
  2. Remove snap ring.
    Fig 2: Removing Snap Ring
    G02887298Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Press support bearing assembly off drive shaft.
    Fig 3: Pressing Support Bearing Assembly Off Drive Shaft
    G02887299Courtesy of NISSAN MOTOR CO., U.S.A.
  4. Separate support bearing from retainer.
    Fig 4: Separating Support Bearing From Retainer
    G02887300Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals