LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 1229 (2004.5 - Navigation System - Sedan) >> Navigation System >> Illumination Signal Check

Illumination Signal Check

WARNING: This page is about a different car, the 2004 Infiniti G35. However, it is still accessible from the selected car via links, so may be relevant.
  1. TAIL LAMP OPERATION CHECK 

    When lighting switch turned 1st or 2nd position, does tail lamp illuminate?

    YES or NO

    1. YES: GO TO 2.
    2. NO: Go to tail lamp trouble diagnosis. Refer to PARKING, LICENSE PLATE AND TAIL LAMPS DO NOT ILLUMINATE .
  2. ILLUMINATION SIGNAL CHECK 
    1. Check voltage between NAVI control unit and ground.
      TERMINAL

      Terminals Lighting switch position Voltage (V)
      (+) (-)
      Connector Terminal (wire color)
      M57 9 (R/L) Ground 1st or 2nd position Approx.12V
      OFF Approx. 0V
      Fig 1: Checking Voltage Between NAVI Control Unit And Ground
      G03328582Courtesy of NISSAN MOTOR CO., U.S.A.

    OK or NG

    1. OK: Replace NAVI control unit.
    2. NG: Check harness for open or short between NAVI control unit and IPDM E/R. Refer to WIRING DIAGRAM -- TAIL/L -- .