LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 1082 (Automatic Drive Positioner) >> Automatic Drive Positioner >> Mirror Motor RH Circuit Check

Mirror Motor RH Circuit Check

WARNING: This page is about a different car, the 2004 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DOOR MIRROR RH MECHANISM 

    Check the following items.

    Operation malfunction caused by a foreign object caught in door mirror face edge.

    OK or NG

    1. OK: GO TO 2.
    2. NG: Repair the malfunctioning parts, and check the symptom again.
  2. CHECK FUNCTION 

    With CONSULT-II 

    Check the operation with "MIRROR MOTOR RH" in the ACTIVE TEST.

    CHECK FUNCTION

    Test item Description
    MIRROR MOTOR RH The mirror motor RH moves the mirror UP/DOWN and LEFT/RIGHT by receiving the drive signal.

    Without CONSULT-II 

    Fig 1: Display ACTIVE TEST
    G03500355Courtesy of NISSAN MOTOR CO., U.S.A.

    GO TO 3.

    OK or NG

    1. OK: Mirror motor RH circuit is OK.
    2. NG: GO TO 3.
  3. CHECK DOOR MIRROR RH CIRCUIT HARNESS CONTINUITY 
    1. Turn ignition switch OFF.
    2. Disconnect automatic drive positioner control unit and door mirror RH connector.
    3. Check continuity between automatic drive positioner control unit connector M41 terminal 14 (GR/R), 15 (V/W), 30 (SB) and door mirror RH connector D113 terminal 9 (V/W), 10 (GR/R), 11 (SB).
      1. 14 (GR/R) -10 (GR/R): Continuity should exist. 
      2. 15 (V/W) - 9 (V/W): Continuity should exist. 
      3. 30 (SB) -11 (SB): Continuity should exist. 
      Fig 2: Checking Continuity Between Automatic Drive Positioner Control Unit Connector & Door Mirror RH Connector
      G03500356Courtesy of NISSAN MOTOR CO., U.S.A.
    4. Check continuity between automatic drive positioner control unit connector M41 terminal 14 (GR/R), 15 (V/W), 30 (SB) and ground.
      1. 14 (GR/R) -Ground Continuity should not exist. 
      2. 15 (V/W)-Ground Continuity should not exist. 
      3. 30 (SB) - Ground Continuity should not exist. 

    OK or NG

    1. OK: GO TO 4.
    2. NG: Repair or replace harness.
  4. CHECK MIRROR MOTOR SIGNAL 
    1. Turn ignition switch ACC.
    2. Check voltage between door mirror RH connector and ground.
    CHECK MIRROR MOTOR SIGNAL

    Connector Terminals (Wire color) Condition Voltage (V) (Approx)
    (+) (-)
    D113 10 (GR/R) Ground When motor is UP operation 1.5 - Battery voltage
    Mirror motor RH OFF 0
    9 (V/W) When motor is LEFT operation 1.5 - Battery voltage
    Mirror motor RH OFF 0
    11 (SB) When motor is DOWN or RIGHT operation 1.5 - Battery voltage
    Mirror motor RH OFF 0
    Fig 3: Checking Voltage Between Door Mirror RH Connector & Ground
    G03500357Courtesy of NISSAN MOTOR CO., U.S.A.

    OK or NG

    1. OK: Replace door mirror motor RH.
    2. NG: Repair or replace harness.
scientia non olet · About LEMON Manuals