LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 106 (Engine Controls - Self-Diagnostics) >> Self-Diagnostic System >> Clearing Diagnostic Trouble Codes >> Using MIL

Using MIL

WARNING: This page is about a different car, the 2003 Infiniti Q45. However, it is still accessible from the selected car via links, so may be relevant.
  1. Enter diagnostic test mode II. See ENTERING DIAGNOSTIC TEST MODE II (SELF-DIAGNOSTIC RESULTS MODE)  under RETRIEVING DIAGNOSTIC TROUBLE CODES.
  2. Fully depress accelerator pedal and hold for more than 10 seconds. Fully release accelerator pedal. To confirm DTCs are cleared, ensure DTC 0000 is set.
scientia non olet · About LEMON Manuals