Bulb Replacement

WARNING: This page is about a different car, the 2003 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.

Remove fender protector front. Refer to FENDER PROTECTOR .
Remove the one side of front bumper where a fog lamp bulb to be changed. Refer to FRONT BUMPER .
Disconnect connector.
Turn bulb socket counterclockwise and unlock it.
1. Fog lamp : 12 V - 35 W (H3 halogen)
Install in the reverse order of removal.

Fig 1: Turning Bulb Socket Counterclockwise
Courtesy of NISSAN MOTOR CO., U.S.A.

CAUTION:

Do not touch the glass of bulb directly by hand. Keep grease and other oily matters away from it. Do not touch bulb by hand while it is lit or right after being turned off. Burning may result.
Do not leave bulb out of fog lamp reflector for a long time because dust, moisture smoke, etc. May affect the performance of fog lamp. When replacing bulb, be sure to replace it with new one.