Checking Neutral Position On Steering Wheel

WARNING: This page is about a different car, the 2003 Infiniti M45. However, it is still accessible from the selected car via links, so may be relevant.

Check neutral position on steering wheel after confirming that front wheel alignment is correct. Refer to "Wheel Alignment Inspection ".

Set the vehicle to the straight ahead direction, check if steering wheel is in the neutral position.
If it is not in the neutral position, remove the steering wheel and reinstall it correctly.
If the neutral position cannot adjust in the two teeth of steering column shaft, loosen tie-rod lock nuts of steering outer sockets, then adjust the tie- rods by the same amount in the opposite direction.