LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R Spec V >> Repair and Diagnosis >> External Pages >> Different car >> Section 425 (Engine Control System - Introduction) >> Basic Service Procedure >> Idle Speed/Ignition Timing/Idle Mixture Ratio Adjustment >> Inspection Procedure >> 33. Check ECM Function

33. Check ECM Function

WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Substitute another known-good ECM to check ECM function. (ECM may be the cause of an incident, but this is the rarely the case.)
  2. Perform initialization of NVIS (NATS) system and registration of NVIS (NATS) ignition key IDs. Refer to ECM RE-COMMUNICATING FUNCTION .
    1. GO TO 4 .