LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R Spec V >> Repair and Diagnosis >> External Pages >> Different car >> Section 2110 (Automatic Transmission) >> DTC P0711 Fluid Temperature Sensor Performance >> DTC Confirmation Procedure >> With Consult-III

With Consult-III

WARNING: This page is about a different car, the 2008 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch "ON". (Do not start engine.)
  2. Select "DATA MONITOR" mode for "TRANSMISSION" with CONSULT-III.
  3. Start engine.
  4. Drive vehicle and maintain the following conditions for at least 15 minutes (Total). (It is not necessary to maintain continuously.)

    VHCL SPEED SE-A/T: 40 km/h (25 MPH) or more 

    SLCT LVR POSI: "D" position 

  5. If DTC is detected, go to "DIAGNOSTIC PROCEDURE ".