LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R Spec V >> Repair and Diagnosis >> External Pages >> Different car >> Section 1047 (Headlamp (For USA)) >> Terminals And Reference Value For BCM

Terminals And Reference Value For BCM

WARNING: This page is about a different car, the 2003 Infiniti M45. However, it is still accessible from the selected car via links, so may be relevant.
TERMINALS AND REFERENCE VALUE FOR BCM

Terminal No. Wire color Item Measuring condition Reference value
Ignition switch Operation or condition
3 R/L Tail lamp signal ON Lighting switch: 1ST ON Battery voltage
OFF Less than 1V
5 W/PU Headlamp relay control signal ON Lighting switch: AUTO Light is applied to optical sensor. Battery voltage
Light is not applied to optical sensor. Less than 1V
11 LG/B Tail lamp relay control signal ON Light switch: AUTO Light is applied to optical sensor. Battery voltage
Light is not applied to optical sensor. Less than 1V
14 Y/L Lighting switch AUTO signal ON Lighting switch AUTO Less than 1V
OFF 8V
17 BR/Y Data link RX - - -
18 P Data link TX - - -
30 PU Communication signal TX (BCM-AV: Transmission) - - -
31 LG Communication signal RX (AV-BCM: Receiving) - - -
37 LG Front door switch (Passenger side) signal OFF Front door switch (Passenger side) ON (open) Less than 1V
OFF (close) Battery voltage
52 G/R Optical sensor signal ON Light is applied to optical sensor. 3V
Light is not applied to optical sensor. Less than 1V
56 B Ground - - 0V
58 Y/B Optical sensor ground ON - Less than 1V
59 SB Optical sensor power supply ON - 5V
60 L/OR Ignition switch ACC - Battery voltage
68 W/B Ignition switch ON or START ON - Battery voltage
105 Y/L Battery power supply OFF - Battery voltage
113 B Ground - - 0V
135 Y/G RAP output signal OFF When headlamp battery saver timer is operated. Less than 1V
142 R/Y Front door switch (Driver side) signal OFF Front door switch (Driver side) signal ON (open) Less than 1V
OFF (close) Battery voltage