Switch Operation

WARNING: This page is about a different car, the 2003 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.

When driver door switch is ON (door is opened), ground is supplied

through BCM terminal 34
to ignition keyhole illumination terminal 2.

And power is supplied

from BCM terminal 24
to ignition keyhole illumination terminal 1.

When any door switch is ON (door is opened), ground is supplied

through BCM terminal 33
to step lamp driver side and passenger side terminal 2.

And power is supplied

from BCM terminal 24
to step lamp driver side and passenger side terminal 1.

When map lamp switch is ON, ground is supplied

through grounds M14 and M78
to map lamp terminal 2.

And power is supplied

from BCM terminal 24
to map lamp terminal 1.

When vanity mirror lamp (driver side and passenger side) is ON, ground is supplied

through grounds M14 and M78
to vanity mirror lamp (driver side and passenger side) terminal 2.

And power is supplied

from BCM terminal 24
to vanity mirror lamp (driver side and passenger side) terminal 1.

When luggage room lamp (RH and LH) is ON, and then back door switch is ON, ground is supplied

through grounds B7 and B20
through back door switch terminal 3
through back door switch terminal 1
to luggage room lamp (RH and LH) terminal 2.

And power is supplied

from BCM terminal 24
to luggage room lamp (RH and LH) terminal 1.